If you need to remove your Nextbase dash cam from its mount for any reason, the process is relatively simple. First, make sure the camera is turned off. Then, unscrew the mounting bracket from the windshield or other surface.
Finally, unplug the power cord from the camera and you’re done!
Removing the GPS mount from the sticky base for Nextbase Series 2 Dashcams
Unclip the camera from its mount on the windshield
Pull the suction cup off of the windshield
Disconnect any cables that are attached to the camera
The Nextbase Dash Cam is now removed from its mount and can be stored away safely until needed again
How to Remove Nextbase 622Gw Dash Cam from Mount
If you own a Nextbase 622Gw Dash Cam, you may be wondering how to remove it from the mount. Here are some simple instructions:
1. Unscrew the two screws that hold the mount to the windshield.
2. Carefully pull the dash cam away from the mount, being careful not to damage the suction cup.
3. Disconnect the power cable from the dash cam.
4. You can now remove the dash cam from your vehicle.
How Do I Remove Dash Cam from Mount?
Assuming you would like tips on uninstalling or removing a dash cam from its mount:
Removing a dash cam from its mount can be tricky, depending on the type of adhesive used and how long the camera has been mounted. If the camera is new, start by gently peeling back any adhesive tabs.
If the adhesive is more stubborn, use a putty knife or other thin object to slowly pry up the edges of the camera. You may need to use a little force, but be careful not to damage either the camera or your car’s interior. Once the camera is loose, simply unplug any cords connecting it to your car’s electrical system and remove it from the mount.
How Do I Remove Nextbase from Windscreen?
If your NextBase dash cam is mounted on your windscreen with suction cups, you can easily remove it by following these steps:
1. Start by peeling back the edge of the adhesive pad that is attached to the bottom of the camera.
2. Once you have a grip on the adhesive pad, slowly and carefully pull the camera away from the windscreen.
3. If there is any residue left on the windscreen, you can remove it with a glass cleaner and a microfiber cloth.
How Do I Change My Nextbase Mount?
If you want to change your NextBase mount, the process is actually quite simple. First, you’ll need to remove the old mount from your windshield. To do this, just peel off the adhesive backing and then gently pull the mount away from the glass.
Once the old mount is removed, simply apply the new one in its place. Again, start by peeling off the adhesive backing and then pressing the new mount into place on your windshield. That’s all there is to it!
How Do You Reuse an Electrostatic Sticker?
An electrostatic sticker is a sticker that has an adhesive on one side and can be applied to smooth surfaces without the use of water or other adhesives. They are often used for temporary applications, such as labels and decals. You can remove and reuse them multiple times without losing their stickiness.
To reuse an electrostatic sticker, simply peel it off the surface it’s stuck to and reapply it somewhere else. The adhesive will still be intact and the sticker will stick just as well as it did the first time. You can also cut electrostatic stickers into different shapes or sizes before applying them.
This makes them ideal for custom applications.
Nextbase Dash Cams are one of the most popular brands on the market, and for good reason. They’re well-made, reliable, and easy to use. But what happens when you need to remove your Nextbase dash cam from its mount?
Fortunately, it’s a relatively simple process. First, you’ll need to remove the power cord from the back of the dash cam. Next, use a small flathead screwdriver to gently pry up the release button on the bottom of the mount.
Once that’s done, you should be able to pull the dash cam away from the mount.
If you’re having trouble removing your Nextbase dash cam from its mount, don’t hesitate to reach out to customer support for assistance.